7.62x51mm - 142 gr Tracer M62 - Lake City in Mil-Spec Ammo Can - 500 Rounds Loose
Out of stock
Quantity - 500 rounds loose in an ammo can
Manufacturer - Lake City
Bullets - 142 grain Tracer
Casings - Boxer-primed brass
Not For Sale In California
We are out of this ammo, but check out these very similar deals
See More Information
|Muzzle Velocity (fps)
|Cost Per Round
||$1.06 per round
Manufactured at the Lake City factory, this mil-spec tracer product is brand new, brass-cased, boxer-primed, non-corrosive and reloadable. This XM80M62 tracer ammo, indicated by an orange tip, begins tracing at around 200 yards. This ammo comes loose packed in a M2A1 military ammunition can, perfect for long-term storage and carrying to the range.
This is top of the line, American-made range ammo made by ATK at the Lake City Army Ammunition Plant (ATK is the same company that makes Speer Lawman, CCI, Blazer Brass, etc) - it doesn't get any better.
Note: This brass is manufactured on mil-spec production lines which require evidence of the annealing process be left on the brass near the neck of the casing often referred to as the iris. This is the darker residue that is visually noticeable around the case neck. Both commercial and mil-spec brass undergoes this same annealing process which make the brass stronger and less brittle. The annealing process essentially runs the brass through a series of flames which heat the brass having the affect of re-strengthening it in its final shape. Commercial brass is then re-cleaned after it has been annealed to make it cosmetically more appealing for the commercial market. Military requirements on the other hand place a larger emphasis on the structural integrity of the casing so they require that evidence that the brass has been annealed remain on the brass.
Try a case today and have a great time doing low-light shooting.
This ammo should not be fired in dry environments as it can present a possible fire hazard.
© 2009-2015 LuckyGunner, LLC.
All Rights Reserved. | Site Map