Cases jam & crack when fired
Review by Mike. (Posted on 9/11/19)
Customer rating:
-
Performance
-
Value
-
Quality
I have a lot of cracked cases with this 38 spl. ammo. Each time it wedges tight. This is with my Ruger Blackhawk as well as two other .38 revolvers.
(Posted on 9/11/19)
1 of 26
Dependable and inexpensive ammo
Review by KsHeritage. (Posted on 7/1/19)
Customer rating:
-
Quality
-
Performance
-
Value
I have shot a lot of .357 Tulammo in my 1892 Rossi with no problems and recently tired the.38 Special Tulammo. Like the .357 I have not had any issues in my Rossi. The ammo has proven to be both dependable and inexpensive and quite accurate too!
(Posted on 7/1/19)
2 of 26
Good training ammo
Review by Scott. (Posted on 8/22/17)
Customer rating:
-
Quality
-
Performance
-
Value
Try a small quantity first, to make sure your revolver likes these. I have a few GP100's that have no problems with it, and some that will not eject this ammo. I use it for high volume match training, speedloader training, etc. If I shoot 5,000 rounds of this stuff I've saved $500 over brass. If all you need is paper punching ammo , this fills the bill. Also great for single actions.
(Posted on 8/22/17)
3 of 26
Great for Lever-Action Rifle
Review by RRW. (Posted on 8/8/17)
Customer rating:
-
Performance
-
Value
-
Quality
Used these primarily in my M92 Rossi 38/.357 lever-action. They worked flawlessly and were accurate. Have used them in a SAA Clone and did not have any sticking problems and soft shooting. Good for getting Shooting practice.
(Posted on 8/8/17)
4 of 26
Do not buy
Review by Jamey. (Posted on 7/18/17)
Customer rating:
-
Quality
-
Performance
-
Value
Cases swelled in chambers excessively. Very difficult to extract cases from cylinder. Some cases blew the primers completely out. A good price on junk isn't a good price.
(Posted on 7/18/17)
5 of 26
Ammo will not eject from my S&W 686
Review by Keith. (Posted on 3/28/17)
Customer rating:
-
Quality
-
Performance
-
Value
I purchased in early Feb before the most recent negative reviews and I expected this to be worry-free target ammo but that is not my experience. I have a new S&W 686 .357 and this ammo WILL NOT eject. I was not expecting this to be the best ammo I have ever shot but for shooting paper on the weekend - I expected better.
Overall, very disappointed
(Posted on 3/28/17)
6 of 26
Poor Quality
Review by Eliminator. (Posted on 2/23/17)
Customer rating:
-
Quality
-
Performance
-
Value
This is a poor quality round. I experienced the same swelling of the steel casing in my S&W M19. It was real tough to extract from the cylinder. The range also informed me that I was not supposed to use this type of round at their facility after the fact. The range attendant also informed me using this round would cause damage to the bore on my gun. I would have never bought this round if I was aware of the issues. Sometimes a deal is not a deal when the quality is not there.
(Posted on 2/23/17)
7 of 26
My 38 special revolver does not like the steel casing. Every single one gets stuck in the chamber and require extra force to remove.
Review by Yato2000. (Posted on 11/13/16)
Customer rating:
-
Quality
-
Performance
-
Value
100% stuck rare and require significant outside force to remove the empty casing from the chamber. Terrible product for the SW 38 Chief revolver.
(Posted on 11/13/16)
8 of 26
Poor quality
Review by Kev. (Posted on 8/29/16)
Customer rating:
-
Performance
-
Value
-
Quality
The steel jacket expanded so much in the cylinder that we had to pry the empties out to load more rounds. Will never buy steel again.
(Posted on 8/29/16)
9 of 26
Indoor range does not allow steel/iron bullet
Review by sp. (Posted on 8/25/16)
Customer rating:
-
Value
-
Quality
-
Performance
Only problem was mine - I didn't check w/range. Before I was able to shoot I was told no steel/iron bullets allowed. Now got to find where I can go outdoor range
(Posted on 8/25/16)
10 of 26
value and quality of ammo
Review by jim. (Posted on 8/17/16)
Customer rating:
-
Performance
-
Value
-
Quality
good price per round. only problem I encountered was steel cartridge swelled in cylinder and was difficult to extract. performance was ok
(Posted on 8/17/16)
11 of 26
Fantastic!
Review by Caleb williams. (Posted on 8/14/16)
Customer rating:
-
Performance
-
Value
-
Quality
Fired more than 200 rounds ,not one problem! Using a pietta arms SA peacemaker .357 and it eats these like tic-tacs,no problem!
(Posted on 8/14/16)
12 of 26
good range ammo
Review by george. (Posted on 8/11/16)
Customer rating:
-
Performance
-
Value
-
Quality
Good cheap range ammo. Never any problems with this ammo. Just clean your weapon after the range trip.
(Posted on 8/11/16)
13 of 26
Fantastic
Review by Caleb. (Posted on 7/31/16)
Customer rating:
-
Performance
-
Value
-
Quality
Keeps it simple.They work and they do it well.I shot ~80 rounds at random and had no malfunctions.Would recommend!
(Posted on 7/31/16)
14 of 26
Great buy little sticky in 38
Review by Gary. (Posted on 7/24/16)
Customer rating:
-
Performance
-
Value
-
Quality
Great ammo for range practice. The casing swell a little in my S&W 38 special. Just need to eject rod with the palm of the hand and they come right out, not a real problem. Will definitely buy again
(Posted on 7/24/16)
15 of 26
Great buy, a little sticky in 360 PD
Review by Bill. (Posted on 7/20/16)
Customer rating:
-
Performance
-
Value
-
Quality
They swelled some in my S&W 360 PD, with Titanium cylinder, but no swelling at all in my Smith 66.
Had to hit the cylinder rod with the palm of my hand to eject the empty cases on the 360, but no big thing.
Will still use them in both guns, great buy.
(Posted on 7/20/16)
16 of 26
Good for the price.
Review by Quigley. (Posted on 7/13/16)
Customer rating:
-
Performance
-
Value
-
Quality
I had these shipped to my Grandaughter who is new to shooting. She lives in Kansas City. She had a little stress locating a range that allowed steel casings. That's no problem here in North Carolina. She worked it out. Thanks for good service.
(Posted on 7/13/16)
17 of 26
What you pay for.
Review by My Name. (Posted on 7/6/16)
Customer rating:
-
Performance
-
Value
-
Quality
I knew, before purchasing these, what to expect; therefore I was not disappointed at all. They do not use a brass casing, so you would not want to reuse the empty shells.
They work great for targets, paper, clay, gel, wood. I would say they would be reliable at stopping an intruder. I don't think I would suggest these for hunting bears though lol.
(Posted on 7/6/16)
18 of 26
.38 spl
Review by RANGER. (Posted on 6/16/16)
Customer rating:
-
Performance
-
Value
-
Quality
Great for cut n paper not much else but for the price You can't go wrong.
(Posted on 6/16/16)
19 of 26
Hangs up in cylinders
Review by Fred. (Posted on 5/4/16)
Customer rating:
-
Performance
-
Value
-
Quality
Slow to work with, swells in cylinder, will not buy this brand again .
(Posted on 5/4/16)
20 of 26
Keep Swelling in Chamber
Review by Tim. (Posted on 2/29/16)
Customer rating:
-
Performance
-
Value
-
Quality
After about 100 rounds through my wife's S&W Model 640 .357 Magnum I have experienced multiple rounds swelling in the cylinder. 2 rounds required me to use vice grips to be able to pull the round out, but outside of this issue the round appears to be accurate enough. Will spend some extra money from now so that I don't have to put the revolver up when I experience this issue.
On another note, Lucky Gunner has been great with purchasing bulk ammo for this, .40 and 9MM rounds. Will certainly continue to order from here, and the shipping has always been prompt.
(Posted on 2/29/16)
21 of 26
Awesome rounds for price!
Review by Z. (Posted on 1/25/16)
Customer rating:
-
Performance
-
Value
-
Quality
Shot about 200 rounds threw my ruger gp100 Wiley clap .357 magnum with no issues whatsoever. I was worried about the steel case being hard to extract but they slid right out with ease! Thanks again LuckyGunner! My new favorite place to shop bulk!
(Posted on 1/25/16)
22 of 26
Meh
Review by Nica. (Posted on 1/25/16)
Customer rating:
-
Performance
-
Value
-
Quality
It's dirty, no question about that. My revolver looks like it's been slung through the mud after just 1 box. I was using brass encased, 158 grain which I very much prefer, but decided to try these due to the excellent price. They are a good value, especially for the range where I might go through 2 or 3 boxes per visit. I will say that the lighter grain makes for less accurate shooting, but all in all, it will do for the intended purpose.
(Posted on 1/25/16)
23 of 26
130 gr FMJ - Tula
Review by Max. (Posted on 12/16/15)
Customer rating:
-
Quality
-
Performance
-
Value
Like the jacketed round, no lead fingers. The steel casings swell a little in my revolver making them tougher than typical brass rounds to eject. Not a big deal, but I took one star off performance since they do behave a little less well than their brass counterparts. OTOH, at their price, I'll push the ejector a little harder every time. Quite a bang for the buck.
(Posted on 12/16/15)
24 of 26
Excellent
Review by Steve. (Posted on 10/2/15)
Customer rating:
-
Performance
-
Value
-
Quality
Used for IDPA competition. Excellent
(Posted on 10/2/15)
25 of 26
Excellent product
Review by KC . (Posted on 9/30/15)
Customer rating:
-
Performance
-
Value
-
Quality
Very good product
(Posted on 9/30/15)
26 of 26
