This product is brass-cased, Boxer-primed, non-corrosive, and reloadable. It is both economical and precision manufactured by one of the oldest European cartridge producers.
|Manufacturer||Sellier & Bellot|
|Bullet Weight||140 Grain|
|Bullet Type||Full Metal Jacket (FMJ)|
|Use Type||Range Training|
|Ammo Caliber||6.5x55 Swedish|
|Cost Per Round||$1.00 to $1.05 per round|
Product Question and Answer
There are no entries.
- Reliability, feeding & extraction. Accuracy was not heavily evaluated. Review by SFC Q
Quality Performance Value
Target was a 10 inch diameter orange bulls for contrast.
Fired unsupported and with a sand bag support.
I used one box of ammunition for functionality & feeding and also to determine basic rifle accuracy in a vintage firearm.
o No problems experienced in the feed and extraction of the rounds.
o All rounds fired reliably
o Accuracy was very good. Conditions which would affect accuracy were temperature and humidity. 86 degrees farenhiet and 60% relative humidity.
All rounds where fired with deliberate attention to sight picture, breathing and trigger squeeze. Basic marksmanship fundamentals before firing in loose, unsanctioned & friendly competition.
I feel confident that the factory loads would be adequate in vintage military rifle completion. No failures from the limited sample used were experienced. (Posted on 7/29/13)