Shop by Category:
If you see it, we have it in stock and ready to ship.
Shop by Category:
|Bullet Weight||660 Grain|
|Bullet Type||Full Metal Jacket Boat Tail (FMJ-BT)|
|Ammo Caliber||.50 BMG|
|Muzzle Velocity (fps)||3080|
|Muzzle Energy (ft lbs)||13688|
PMC Great Stuff!! by Rooftop Voter on 10/20/2010
I have shot this before using the same ammo purchased at the Machine Gun Shoot from Knob Creek KY and I find it a nice r...
4 of 4 people found the following review helpful
50 bmg by trav on 12/19/2010
this is some really descent ammo, for the price.Perfect for plinking, i will get a few more boxes shortly, buy it from l...
1 person found the following review helpful
It's what it is
Delivered as advertised, kind of a pain out of a 22inch bolt gun. Fireball is real and the muzzle brake doesn't even touch the recoil. There's enough powder burn outside the barrel it generates noise complaints for the entire county. Do recommend
An Update: Brass is of excellent quality for reloading. Just picked up the RCBS 50BMG Ammomaster Kit and this stuff sizes really well. Once I get all the little tid-bits that go with relaoding, I will be saving myself to the poorhouse one round at a time but for less money per round!!
PMC Great Stuff!!
I have shot this before using the same ammo purchased at the Machine Gun Shoot from Knob Creek KY and I find it a nice round for the Barrett 50. No matter what you feed this cannon, it will blow your hair back but I feel this 660 grain round does not put too much stress on the rifle. As with any mass produced round, accuracy is not the same as hand loads but will group quite well at 100 yds which is the yardage limit for the current shooting range I use.
I also bought some MilSurp rounds from Lake City dated '52 and I do not know the specs on these so I am leery of shoving one of these in the 50 until I pull a round for weight, etc.
PMC from Korea has been around for ages and I still shoot the 45 cal for the 1911 and I never had a bad round. I had bought boxes of this in the mid '70's and they still look and function just fine.
Per an agreement with the US Gov't, we had actually shipped loading equipment to S. Korea for their use in the manufacture of 45, 30.06, 50 cal and a few other rounds. What you get from them is made on US equipment so I can rest assured each round will function without a flaw. So far, so good.
My latest aquisition of rounds from Luckygunner is the same lot number as my previous purchase from KY so I know these will light off just as smooth.
Remember kids, squeeze off each shot and don't jerk the trigger. Clean and lube all weapons before putting to bed and keep your powder dry..............
You're reviewing: 50 Cal BMG - 660 Grain FMJBT - PMC - 10 Rounds
Posted On: 4/5/2021 By: Vernon W Bridges
Posted On: 8/22/2019 By: Nelson Jacobson
Posted On: 4/2/2017 By: robert cartwright
All Rights Reserved. | Site Map